For Antminer Miner S9 S7 L3+ D3 1600W Platinum Antminer APW3 Mining Power Supply


Buy Now



Price: £110.00

1600W Special Power Supply For S7 S9 L3+D3 APW3 Mining Machine
Note:The Voltage Range is AC 176~264V,if the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work.
Input Characteristic
Voltage Range: AC 176~264 V
Input Rated Voltage: AC 200~240 V
Starting Inrush Current: ≤80 A
Maximum Input Current: ≤10 A
Efficiency: ≥92%

Output Characteristic
Output Rated Voltage:DC 12.25 V
Load Regulation:≤±2%
Linear Regulation:≤±1%
Rated Output Power: 1600W(Max) Output Current: 0~130 A
Output Ripple And Noise: ≤180 mVp-p
Drive And Shut Down Overshoot Range:≤±5%
Rise Time: ≤100ms(230 V rated load test)
Boot Time: ≤ 3S(230 V rated voltage test)
Hold Up Time:≥10 mS(230 V rated voltage test)

Protection Characteristics
Input Under-voltage Protection Point: ≤180 V
Input Under-voltage Recovery Point: ¡Ü185 V
(Can automatic recovery, the backlash is not less than 5V
Input Over-current Protection: Yes
(The over-current point is between 130~160A)
Output Short-circuit Protection: Yes
(Recovery after removal of short circuit)
Input Over Temperature Protection: Yes
(When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored automatically below 65 degrees centigrade.)

Environment Conditions
Operating Temperature: -40~+50℃ Full Load (Typical value is 25 ℃)
Storage Temperature: -40~+85℃(Typical value is 25 ℃)
Operating Humidity: 5~95% Frost-free
Storage Humidity: 0~95% Frost-free
MTBF: 50000 H (Typical value is 25 ℃)
Altitude: ≤5000 m (Normal Work)
Heat Dissipation Mode: Air Blast Cooling

Package Included:
1 x Mining Power Supply

Model: G1029-1600W
Size(L*W*H):32 x 15 x 4.57 cm
Cable Length: 39 cm
Connectors: 6 PIN X 10 Pcs
Number of Interfaces:10;Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Mining Machine


There are no reviews yet.

Be the first to review “For Antminer Miner S9 S7 L3+ D3 1600W Platinum Antminer APW3 Mining Power Supply”

Your email address will not be published. Required fields are marked *