Dxlta 1600W/1800W APW3 Mining Machine Power Supply for Antminer Miner S9 S7

£109.35

Buy Now

Category:

Description

Price: £109.35

Features:

Model: G1029-1600W/G1057-1800W

Shell Material: Aluminum | Size: 25.5 x 9 x 4.5 cm | Cable Length: 39 cm | Power Cord Length: 1.5 Meter | Connectors: 6 PIN X 10 Pcs | Number of Interfaces:10

Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Mining Machine

Input Characteristic

Voltage Range: AC 176~264 V | Input Rated Voltage: AC 200~240 V | Starting Inrush Current: ≤80 A | Maximum Input Current: ≤10 A(1600W),≤15 A(1800W) | Efficiency: ≥92%

Output Characteristic

Output Rated Voltage:DC 12.25 V | Load Regulation: ≤±2% | Linear Regulation: ≤±1% | Rated Output Power:1600W(Max)/1800W(Max)

Output Current: 0~130 A(1600W),0~150 A(1800W) | Output Ripple And Noise: ≤180 mVp-p(1600W),≤120 mVp-p(1800W) | Drive And Shut Down Overshoot Range: ≤±5%

Rise Time: ≤100 ms(230 V rated load test) | Boot Time: ≤3S(230 V rated voltage test) | Hold Up Time: ≥10 mS(230 V rated voltage test)

Protection Characteristics

Input Under-voltage Protection Point: ≤180 V | Input Under-voltage Recovery Point: ≤185 V (Can automatic recovery, the backlash is not less than 5V)

Input Over-current Protection: Yes (The over-current point is between 130~160A)

Output Short-circuit Protection: Yes (Recovery after removal of short circuit)

Input Over Temperature Protection: Yes (When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored automatically below 65 degrees centigrade.)

Environment Conditions

Operating Temperature: -40~+50℃ Full Load (Typical value is 25 ℃) | Storage Temperature: -40~+85℃ (Typical value is 25 ℃)

Operating Humidity: 5~95% Frost-free | Storage Humidity: 0~95% Frost-free

MTBF: 50000 H (Typical value is 25 ℃) | Altitude: ≤ 5000 m (Normal Work)

Heat Dissipation Mode: Air Blast Cooling

Parcel Included: 1 x Mining Power Supply

Model: G1029-1600W/G1057-1800W
Shell Material:Aluminum
Size:25.5 x 9 x 4.5 cm
Cable Length: 39 cm
Power Cord Length: 1.5 Meter

Reviews

There are no reviews yet.

Be the first to review “Dxlta 1600W/1800W APW3 Mining Machine Power Supply for Antminer Miner S9 S7”

Your email address will not be published. Required fields are marked *